Towing Capacity Chart for the Jeep Wrangler (2022 Guide)

The Jeep Wrangler is an excellent choice of vehicle for outdoor activities. The towing capacity can pull both small trailers and boats, but it all depends on the engine installed in the jeep model.

I spent the last forty-eight hours conducting research to assist you —with the help of a Jeep Wrangler towing capacity chart below—in determining how much weight you can comfortably tow and any other pertinent facts that you need to know.

How Much Weight Can the Jeep Wrangler Tow?

The Jeep Wrangler was initially designed for daily and adventure activities, such as a war automobile in the WWII and later as a farm automobile in some parts of America. It has progressed from the 1940 Willys quad to the newest Jeep Wrangler JL.

Compared to the Jeep Wrangler YJ, which has a towing capability of 2,000 pounds, the JK Unlimited and the JL have a towing capacity of 3,500 pounds. This means you can test drive and haul the most recent travel trailers and boat models.

What’s Included in The Jeep Wrangler Tow Package?

The tow hitch, which is standard equipment, can be used to calculate the maximum load that the vehicle is capable of hauling. By participating in Jeep brand events or the Jeep Wave, you will have the opportunity to obtain more vehicle information (such as the car delivery date and relevant incentives) on pre-production vehicles or those that have not yet been placed on the dealer’s lot.

Owners with VIP access can get worry-free maintenance, confidence, and protection with additional 5-year coverage for retail purchases. You can also make use of the supplementary equipment listed below, which is included in the package:

• 200-Amp Alternator
• 700-Amp Maintenance-Free Battery
• 7 and 4-pin Wiring Harness
• Class-II Tow Receiver Hitch
• Winch & Control Light Bars
• Programmable Aux Switches

Overall Towing Capacity & Specs

Four-Door Models

Both the Jeep Wrangler Sport Altitude and the Jeep Gladiator are four-door variants with a capacity for 5 passengers and leg-room in the back that measures 38.3 inches. It is capable of pulling a trailer weighing up to 3,500 pounds.

Meanwhile, its wheelbase is longer than that of two-door variants, spanning 188.4 inches. Which means the towing capacity of this model is superior.

Two-Door Models

According to the towing capacity table for the Jeep Wrangler, the maximum weight that most jeeps can haul is 3,500 pounds. On the other hand, the towing capability of two-door vehicles is limited to a maximum of 2,000 pounds.

Additionally, it can only accommodate four people, with leg-room in the backseat measuring 35.7 inches and 166.8 inches in length, despite having the same height and weight as the four-door variants, which are 73.6 x 73.8 inches.

Features That Enhance the Jeep Towing Capacity

The most technologically advanced websites for car dealers offer services to improve the safety of their customers’ vehicles. However, before you can get your vehicle listed for upgrades or get VIP access to brand events, you need to have a thorough understanding of all of their prices, including registration fees, government fees levies, delivery fees, and other procedural charges.

The alternatives a dealership package offers:

• Electronic front sway bar disconnects for improved performance
• Neutral range options for lifting heavy loads on level terrain.
• Trail Brake Controller with an adjustable braking power
• Rear camera with grid lines for zooming in on wheels and trailer hitches
• Heavy-duty tow hooks in the front and rear.

Jeep Wrangler’s Tow Limit

Towing capability for four-door models of the Jeep Wrangler, such as the Jeep Gladiator, can reach up to 3,500 pounds when properly equipped, while towing capacity for newer models of the Jeep Wrangler can reach up to 4,000 pounds.

To satisfy your need for a bigger towing capability, the Chrysler, Dodge, and Jeep Ram 1500 has a limit of up to 12,750 pounds that it can haul behind it. There is also a short-wheelbase version of the Wrangler that is comparable to the Jeep Compass and has a capacity of up to 2,000 pounds.

The Job of the Axle Ratio

A vehicle’s axle ratio is one of the essential elements since it can improve its towing capability and impacts the amount of fuel it uses. Towing capability of a vehicle will grow in proportion to the increase in the axle ratio.

On the contrary, increasing a vehicle’s towing capability will result in a reduction in both the maximum speed and the fuel economy of the vehicle. Vehicles that have a lower axle ratio offer superior fuel economy but move at a slower pace.

Frequently Asked Questions

Which Jeep Wrangler 4×4 System is best for towing?

The Command Trac 44 is the best system for towing because it has a neutral range and a lower gear ratio of 2.72:1. Even though the 2021 Jeep Wrangler is one of the newest models and can pull up to 3,500 pounds, you should consider the vehicle’s system before towing anything.

How much can a Jeep Wrangler tow with a tow package?

When equipped with a tow package, the two-door version of the Jeep Wrangler can pull up to 2,000 pounds, while the four-door version can haul up to 3,500 pounds. However, when fully equipped, the 2019 Unlimited model can pull up to 5,500 pounds, while the Chrysler, Dodge, and Jeep Ram can pull up to 12,750 pounds.

Conclusion

The towing capacity of the Jeep Wrangler varies depending on the model characteristics. It is possible to maximize the 4×4 system by upgrading. To ensure that your vehicle is protected to the fullest while you are towing, it is critical that you have all of the necessary equipment, regardless of whether you drive a Chrysler, Dodge, Jeep Ram, or a 2021 model Jeep Wrangler.

You can also attend events hosted by the Jeep Ram brand and become a VIP owner to enjoy worry-free maintenance, confidence in the quality of the vehicle’s design, and a more in-depth look at the towing capacity of the Jeep Compass. You will also be informed on MSRP (Manufacturer’s suggested retail price) to know whether it excludes extra expenses, such as taxes and the emission testing fee.