How To Remove Plasti Dip From Wheels: 5 Methods


Plasti dip are fun until your personalized style becomes outdated. Or perhaps you plan to sell your car and need to remove the Plasti Dip as soon as possible.

Plasti dip are not permanent, despite what it would appear to be, and you can get rid of it. In this article, I will discuss 5 methods you can employ to remove Plasti dips.


How To Remove Plasti Dip From Wheels: 5 Methods

Method 1: Rubbing Alcohol

Many organic substances can be dissolved by rubbing alcohol. So, if that is what’s available, you can use it to clean your rims.

Since rubbing alcohol isn’t particularly toxic, face masks and gloves aren’t required. Consider them if you want to be extra cautious. You should also ensure that none of it gets on your skin.

You’ll need more gloves depending on how strong the alcohol content of the rubbing alcohol is. It could severely harm your skin.

 Apply it in light layers, wait for it to soak in, then begin peeling. Add alcohol until there is no trace of the plasti dip on your rims.

However, exercise extreme caution when using alcohol. If you leave it on your tires for too long, it will damage them, which is fatal so once you’re done,  remove it immediately.

Method 2: Using Kerosene

This method involves using kerosene to remove the Plasti dip. Kerosene is an excellent solvent. Apply the kerosene on the plasti dip, wait for some time, then use a stick or any blunt object to scrape out the plasti dip.

Method 3: Using A Paint Thinner

Paint thinner is a good solvent, so you could try it on your plasti dip.

It should work well on the trim strips left over after using another substance. You can use it on the entire plasti dip if you don’t have anything else.

The method for removing the dip is the same as described above: apply it, wait for it to soak, and then begin scraping.

Paint thinner might only remove a fraction of the plasti dip, so repeat the process until it is stripped away in layers. Scrubbing the plasti dip with a paint thinner-soaked toothbrush may help speed up the process, but it may also be ineffective. The ease with which it can be removed determines how thick and tightly the plasti dip is bound together.

Method 4: WD-40

Wd-40 is one of those unique substances that can do almost anything. It lubricates, cleans, and removes rust. It also aids in the removal of plasti dip from your wheels.

You can substitute WD-40 for kerosene, but it might not work as well as kerosene would.

On the contrary, many people report a range of emotions. Some claim that all you need is WD-40, 10 minutes to soak it in, and a pressure washer.

Most of the plasti dip should be removed after using the pressure washer. Clean up the rest with a rag, then wash your rims.

WD-40 is not as corrosive as kerosene, in case you have both and are confused about which is best to use.

Wear protective gloves and place the tire on cardboard before attempting this method of plasti dip removal.

However, with this substance, you can be less concerned about getting it on the tire’s rubber coating. It will not corrode, but you’ll still need to remove it before driving.

Method 5: Nails

If there are no usable substances and you have an urgent need to remove plasti dip, it’s time to be daring, but with the caution of a surgeon’s hand.

Pick up a nail, chip some plasti dip, and peel. However, do not use a hammer to drive the nail into the dip!

This option works best if the plasti dip layer is thick enough to pierce without touching the rim.

This method is not safe. Firstly, the pointy object you’re holding could injure you. Second, if you make a mistake, it may scratch your rims.

This method should only be used as a last resort because it is tedious, time-consuming, and a lot could go wrong.

Frequently Asked Questions

Does Plasti Dip Come Off Easily?

Plasti dip is not difficult to remove, especially if a substance is used to soften it first. The thicker the layering, the easier it is to remove. However, if the layers are too thin, you’ll be scratching and peeling for hours.

Will Acetone Take off Plasti Dip?

Yes, Acetone will remove plasti dip, but if the tires have begun to oxidize, they may react negatively. It can be used in an emergency, but there are better alternatives.

Does Goo Gone Remove Plasti Dip?

Yes, Goo Gone will get rid of plasti dip. On the other hand, the odor is strong, so you’ll need face protection to deal with Goo. Fortunately, it’s not dangerous, so you can go without protection if you don’t have any.


Plasti dip removal varies depending on the rim. Some days it’ll peel off easily, but other days you’ll be chipping away for hours.

Work with the tools you have and be patient, and you should be able to remove the plasti dip. If you still have problems after trying everything, you should talk to a mechanic.