How to Fix Service Shifter on Jeep Grand Cherokee (2022 Edition)

The Jeep Grand Cherokee is a compact crossover SUV that is one of the leading four-wheel trends in the United States. It features a nine-speed ZF automatic transmission manufactured by Jeep. On the other hand, some of the units reported problems, which led to an action to recall most of them.

I devoted a total of forty-eight hours to investigating the service shifter of a Jeep Cherokee, and collected necessary information so I can discuss them in this article.


What does it mean when the Service Shifter light is blinking?

If the service shifter light in your vehicle starts blinking, this indicates that the onboard chip of your vehicle has either identified a problem or has falsely diagnosed a fault.

Suppose you cannot determine the precise reason why the service shifter warning light is blinking on your Jeep Cherokee. You will need to take it to a professional so they can check for blown fuses, software glitches, or determine whether or not the shifter itself needs to be replaced.

Unfortunately, if you are using any of the KL series vehicles manufactured between 2014 and 2017 (a model that was recalled), there is a strong possibility that something is wrong with them. In any other case, all that is required is a quick fix.

Is It Unsafe If the Service Shifter Light Is On?

It depends. The service shifter light is there to serve as a reminder in situations as basic as an issue with the wiring or an ongoing issue with the component itself. In these scenarios, the light will come on. It is not a question of how to interpret the situation; rather, it is an indication that you need to go to the repair shop.

According to reports, several Jeep Cherokee models from 2017 to previous models from 2014 had power loss and problems with the PARK function. Running simple diagnostics when the service shifter light flashes may demand costly out-of-pocket expenses.

In the event that the worst-case scenario occurs, you always have the option of taking your vehicle to the mechanic with the help of towing services.

Is It an Inconvenience or a Warning Signal?

It’s a warning signal. A warning light on the shifter could indicate that the gear shift needs to be repaired or that there is an issue with the system software that is erroneously diagnosing a minor problem.

The only reliable technique to solve automobile difficulties is to make a short trip to the technician for a definitive response.

What to do when you get a service light

If the issue persists, you will need to restart your vehicle. Turning your car’s ignition on and off could cure this relatively straightforward issue.

You can resolve the issue yourself or seek a professional’s assistance if the service shifter light on your Jeep Cherokee continues to blink. There have been reports of problems with certain Jeeps, specifically with the shifter component, which may require replacement. However, this problem affects a relatively small percentage of four-wheel vehicles.

In highly unusual cases, the issue may result from a faulty fuse or outdated software in the car.

How To Turn Off Service Shifter Light

Before spending your money on professional help, you can try to fix the shifter warning light on your own. Your first approach, which also happens to be the simplest one, is to try turning your vehicle’s engine on and off.

If this does not work after you have tried it a couple of times, disconnect the batteries for fifteen minutes and then reconnect. If that doesn’t work, you might consider changing the oil.

The Jeep Cherokee service shifter light might stop blinking after you try these steps.

Is it safe to drive the Jeep Grand Cherokee with the lights on?

It certainly is. But if you are uncomfortable with the light, you can pull over to the side of the road and park your vehicle. No one enjoys having a headache, especially when the only remaining option is to shell out money and use the services of a tow truck.

To determine whether or not there are any problems with the onboard computers of automobiles, you need a professional to check the computer. As a result of a problem with the shifter, certain Jeeps have been subject to a recall because the issue affects the entire vehicle.

Frequently Asked Questions

Can you fix the service shifter Jeep Cherokee light on your own?

Yes, it is possible to repair the service shifter light at home, but you should be aware that doing so may render the warranty void. Your nearest car dealership has an approved auto mechanic on staff who can diagnose your vehicle accurately.

How much would it cost to fix the service shifter Jeep Grand Cherokee?

Repairing your vehicle’s shifter might cost between $300 and $900. This depends on whether it only requires a minor repair or if it has to be replaced. If you have a valid warranty, you won’t have to spend a fortune because it’s still insured. To be sure, you should verify this with your car dealership.


Jeeps have a reputation for being trustworthy road companions. Still, you never know when a relatively harmless problem like a service shifter light that’s on, could turn into a major recall issue.

If the service shifter light is on, it may indicate that it is time for routine maintenance or that it could be recalled. You might not know if your vehicle needs a repair until you have had an appointment with the mechanic.

It is in your best interest to inspect it so you can determine whether or not there is a problem and whether or not any of its components need to be replaced immediately.